5
1-800-634-7328 DirectSupply.com
Caster Installation
Casters are usually installed before delivery but they can be installed after purchase.
Please contact your Direct Supply representative for additional details, and allow some
time for the casters to be delivered. Direct Supply will provide installation instructions
based on the collection ordered. Installation will require someone who has experience in
general product assembly and fabrication.
•
WARNING:
Install casters ONLY on bedside cabinets. Do not install casters on any
other furniture.
1. Remove everything from the bedside drawer(s) and/or lower compartment.
2. Remove all of the drawers from the bedside. Be sure to label them so they go back
in the way they came out.
3. Carefully turn the bedside cabinet upside down. Make sure to place something on
the floor to protect the top surface from being scratched.
4. Reference the drawing that was sent for installation reference.
5.
Position the casters as the drawing states.
6. Using a pencil, mark the holes onto the bottom panel using the caster plate as a
template for all four casters.
7.
Remove the casters from the bottom panel.
8. Drill pilot holes into the bottom plate. Be sure the depth is set to 0.50".
9. Install casters with the provided screws.
10. Carefully place the bedside upright on its new casters and check for stability and
proper functionality.
Caster Installation
