Direct Supply Maxwell Thomas LAMINATE CASEGOOD Owner'S Manual Download Page 3

3

1-800-634-7328    DirectSupply.com

Warnings

 

WARNING:

 Do not sit on this product.

 

WARNING:

 Failure to comply with all instructions, warnings and precautions, or using 

the product for a purpose other than its intended use, could result in bodily injury.

 

WARNING:

 Do not stand on this product.

 

CAUTION:

 Do not move furniture on bare hardwood floors. At all times, place the 

furniture on a protective area rug or protective hardwood felt pads. This will help protect 

your hardwood floors from potential scratches.

 

CAUTION:

 A minimum of two people is required to place the mini-refrigerator inside 

the hospitality station. Do not attempt to install the mini-refrigerator by yourself, as it 

could result in personal injury.

 

CAUTION:

 Do not expose surfaces to prolonged moisture.

 

CAUTION:

 Always check with your local authorities to ensure this product meets all 

applicable regulations and fire standards.

 

CAUTION:

 Hospitality stations are designed to be positioned with unit backs against 

a wall. If the backs of the units are positioned away from the wall, the exposed cords 

will create tripping hazards.

 

CAUTION: 

Drawer boxes are designed to temporarily hold spills and prevent liquids 

from penetrating through to other parts of the cabinet. Prolonged exposure to moisture will 
damage the bottom drawer box panel.

 

NOTE:

 All Maxwell Thomas casegood furniture meets ANSI/BIFMA X5.5 – 2016 standards.

NOTE:

 All Maxwell Thomas casegood furniture is CARB II compliant. 

NOTE:

 Hospitality stations have an opening of 32

3

4

"H x 22"W for a mini-refrigerator and an 

opening of 16"H x 22"W for a microwave. Please be sure your refrigerator and microwave 
will fit inside these openings and function properly.

Cleaning

We recommend the following cleaning practices to help maintain the appearance of the 

thermolaminate and laminate surfaces on your Maxwell Thomas casegood furniture.
Laminate and thermolaminate surfaces should be cleaned using a damp cloth or 

sponge with a mild soap or detergent. Difficult stains, such as coffee or tea, can be 

removed using a mild household cleaner/detergent and a soft bristled brush, repeating 

as necessary. DO NOT use abrasive chemicals, as they can damage and discolor the 

surfaces. Use of bleach or other harsh chemicals can cause damage to the surfaces, so 

their use is strongly discouraged. Dry all surfaces immediately following cleaning and 

allow units to completely dry before placing items that could be damaged from moisture 

on the cleaned surfaces. 

Maintenance

Examine the product at least every 60 days, or more often as needed, for loose screws, 

joints and other miscellaneous damage. Do not use the product if it has been damaged 

in any way. If there is damage, evaluate the extent and tighten, adjust or replace screws 

as needed. Use furniture touch-up markers and furniture polish for minor wood finish 

scratches and scuffs. 

Warnings, Cleaning and Maintenance

Summary of Contents for Maxwell Thomas LAMINATE CASEGOOD













Reviews: