1-800-634-7328
■
directsupply.com
17
Application of Adhesive Electrodes
Application:
• Clean and dry the skin at the prescribed area thoroughly
with soap and water prior to application of electrodes.
• Insert the lead wire into the pin connector on the
pre-wired electrodes.
• Remove the electrodes from the protective liner and apply
the electrodes firmly to the treatment site.
Removal:
• Lift at the edge of electrodes and peel; do
not pull on the lead wires because it may
damage the electrodes.
• Place the electrodes on the liner and remove
the lead wire by twisting and pulling at the
same time.
Care and Storage:
• Between uses, store the electrodes in the resealed bag in a
cool dry place.
• It may be helpful to improve repeated application by
spreading a few drops of cold water over the adhesive and
turning the surface up to air dry. CAUTION: Over-saturation
with water will reduce the adhesive properties.
•
WARNING:
• Only use the device with electrodes provided by the manufacturer.
• Do not apply electrodes to broken skin.
• The electrodes should be discarded when they no longer
adhere to the skin.
• The electrodes are intended for single resident use only.
• If irritation occurs, discontinue use and consult your
clinician or other licensed healthcare professional.
