Direct Nexus MDS-1001, Manual

Page: 24 / 35

YOUR DEVICE IS READY FOR FIRST USE
1- Make sure the power switch is off.
2- Plug in the electrical plug.
3. Remove the inhalation kit cover from the medication cup by gently pulling
it up.
4. Put the prescribed amount of medication into the medication cup.
5- Make sure that the nebulizer in the medication cup is properly installed.
6- Put the medication cup cover back onto the the medication cup.
7- Connect the mask or mouthpiece in the nebulizer kit firmly.
8- Insert the air tube plug firmly into the air tube connector.
9- Turn the power switch to (). When the compressor is running,
nebulization begins and aerosol is produced. Inhale and exhale while
wearing a mask and mouthpiece.
ı
Warning
Do not tilt the nebulizer kit in all directions at an angle greater than 45
degrees. The medication may flow into the mouth or the nebulization may
be inefficient.
x
21
Correct
Use
Incorrect
Use