Direct IP Idis IR-300A, Installation Manual

Page: 22 / 51

22
Part 3 - Appendix
Troubleshooting
Problem Solution
The main unit won't turn on.
●
Check the power cable connection status.
● Check the power outlet.
●
Check the ATX power if the red LED is on or the buzzer rings. If the red LED is
on or the buzzer rings, change the ATX power.
The monitor screen is not
displayed.
● Check the cable connection between the monitor and the product.
●
Check if the mainboard makes the beep. If a certain beep sound rings and
the monitor screen is not displayed, contact the manufacturer in case of the
mainboard failure.
Specifications
These product specifications may change without prior notice.
VIDEO
Video Inputs RJ-45 (Network Camera)
Video Outputs 1 HDMI, 1 DP, 1 VGA
Display Speed/Recording Speed Max. 120ips @ Full HD / 1920ips @ Full HD (6Mbps)
* VGA, DP, HDMI main outputs support dual output, and not triple output.
* Recording speed may be slowed down during the RAID rebuild process
* Installing SW other than the provided SW may degrade the product performance.
* Running the client on this product may affect the recording performance when monitoring more than 32 channels with resolution
higher than FHD. It is strongly recommended to use Dynamic Multiple Stream. If it continues to have problems, change the number
of cores used by the Client to fix them.
AUDIO
Audio Inputs
1, "line in", 1 Vp-p
Audio Outputs
1, "line out"