Direct IP Idis IR-300A, Installation Manual

Page: 19 / 51

Part 2 - RAID Configuration
19
If the user selects a controller item from the tree view, it
will display the model name and capacity of the RAID and
disks connected on the specified controller at the right
top table and also display all connected disk charts at the
right bottom area. For RAID member disks, the disk charts
will be drawn with the different colors according to the
different RAID.
RAID Information
If the user selects a RAID item from the tree view, it will
display the detail information of the specified RAID at the
right top table and also display the RAID member disk
charts at the right bottom area.
If the selected RAID is in rebuilding state, it will be
highlighted with green color in the tree view. Also, the
rebuilding animation will be played at the bottom left
and right area. The rebuilding percentage is displayed at
the bottom center area, too.
The user could simply click the
RAID Information
label
to identify the member disks of the specified RAID with
all disk LED flashings at the same time.
Disk Information
If the user selects a Disk item from the tree view, it will
display the detail information of the specified disk at the
right top table and also display the disk pie chart at the
right bottom area.
If the selected disk is one member disk of the rebuilding
RAID, the rebuilding animation will also be played at the
bottom left and right area. The rebuilding percentage is
displayed at the bottom center area, too.
The user could simply click the
Disk Information
label to
identify the specified RAID with the disk LED flashing.
If the disk is a RAID member disk, the application will
show an
Advanced…
label at the right bottom corner
of the table. The user could simply click it to browse the
SMART information of the specified disk.