13
©Direct Connection RC
Completing your plane
Lightly sand the plane before covering.
Cover the plane, apply decals as desired. Paint splotch decals are designed to be installed in the
following order (left to right, with nose of plane facing you): blue, green, purple, red. Varying the order
of the decals may result in overlapping or other undesired effects.
Install the elevons and fins. We recommend removing the covering from the bottom slots of the fins and
applying with epoxy or CA glue to ensure proper adhesion.
To install the battery cover, hold down, you can use permanent magnets, 2 servo horns (creating a
latching system) or any other fitting that suites your needs.
Plane is complete, finish your plane with your required hardware (servos, hook up linkages, mount
motor, CA hinges, install your rx, etc).
With the battery installed the CG should be just in front of the main spar.
Damaged one of your parts or need to rebuild?
Replacement parts are available, please contact us at
