Instructions for Use
Dipl.-Ing. H. Horstmann GmbH
SMART NAVIGATOR
5
P
ART
1
-
I
NTRODUCTION
1.1
I
NTRODUCTION
This manual describes how to install, operate and troubleshoot the SMART NAVIGATOR Faulted
Circuit Indicator for distribution voltage overhead lines. It covers the following part number:
43-XXXX-XXX SMART NAVIGATOR
The manual consists of 4 main parts:
Part 1 – Introduction
Gives an overview of the Navigator / SMART NAVIGATOR overhead line fault indicator
Part 2 – Functionality
Describes the functionality of the Navigator / SMART NAVIGATOR
Part 3 – Installation & Operation
Describes how to install, operate and troubleshoot the Navigator / SMART NAVIGATOR
Part 4 – Technical Data
Contains the technical data of the Navigator / SMART NAVIGATOR
1.2
A
BBREVIATIONS
Abbreviation Definition
DA Distribution
Automation
FCI
Faulted Circuit Indicator
ISM
Industrial / Scientific / Medical
RF Radio
Frequency
RTU
Remote Terminal Unit
1.3
I
NTENDED USE
The SMART NAVIGATOR is an overhead faulted circuit indicator that is designed and engineered for
Smart Grid – Distribution Automation applications. The SMART NAVIGATOR is installed on overhead
distribution circuits and transmits event based fault information in addition to continuous circuit status
information. The SMART NAVIGATOR is integrated into an existing Smart Grid system and can
operate in different WAN environments such as cellular, radio, etc. A pole mounted concentrator,
either the SMART RECEIVER or SMART CONTROLLER acts as WAN access point.
