diono.com
radian 3QX
64
65
BELT LOCKING CLIP
WARNING:
If your vehicle lap/shoulder belt is equipped
with ELR (Emergency Locking Retractor) that does
not switch to function as an ALR (Automatic Locking
Retractor), you
MUST
use a locking clip to secure lap
portion of vehicle seat belt. If you have any questions,
please consult your vehicle owner’s manual or contact
the vehicle manufacturer.
1. Remove lock clip storage
location
1
on back of seat.
2. Route the vehicle seat belt
through the proper belt path
and buckle it in.
While pushing
down on seat, pin the two straps
together behind the buckle
tongue. Unbuckle the belt without
allowing it to slip.
3. Attach locking clip to lap/
shoulder belt as shown.
Rebuckle belt.
Check that lap
belt does not move by pulling
hard. If belt loosens or lengthens,
repeat procedure.
1
1
2
3
REAR-FACING INSTALLATION
1. Adjust the seat belt buckle to
its shortest length to ensure the
buckle is accessible for release.
2. Ask the flight attendant for a “seat
belt extender” and then use this
extender to adjust the seat belt length.
3. Following the instructions in rear-facing installation
section for use with a lap belt to complete.
FORWARD-FACING INSTALLATION
Follow the instructions in the
forward-facing installation section
for use with a lap belt.
AIRCRAFT INSTALLATION
