DioLuce, LLC 185 Main St. #4230300 New Britain, CT 06051
www.dioluce.com
5
3.
Verify the dimensions of the existing housing are within tolerance, width 22.63 +/-
1/8 inch, length 46.9 +/- 1/8 inch.
4.
Use appropriate equipment to test the incoming voltage. The voltage must be
120 or 277 VAC, within the voltage rating shown on the power supply label. Turn
off all power at the circuit breaker before continuing installation.
5.
Configure the LED power DIP switches for the desired power settings. The DIP
switches are located on the DC side of the power supply. Refer to Dip Switch
Configuration chart on page 2.
