1 OF 7
IG050619-3.0
HYDROLUME
®
SLIM RGB LED STRIP LIGHT
INSTALLATION GUIDE
®
HYDROLUME
®
SLIM RGB LED Strip Light
INSTALLATION GUIDE
Input
24VDC Constant Voltage
Power
3W/ft. (1.5W/cut point)
Max Run
25.29 ft.
Ambient
Temp †
-4° - 140°F (-20° - 60°C)
Wiring Diagram
Black Wire
= 24VDC +
White Wire
= Green Light
Red Wire
= Red Light
Green Wire
= Blue Light
1. Install in accordance with national and local electrical
code regulations.
2. This product is intended to be installed and serviced by a
qualified, licensed electrician.
3. Do not modify or disassemble this product beyond
instructions or the warranty will be void.
4. All plastics are affected by the elements and may shift
in color and other properties after product installation,
particularly with direct exposure to sun, chlorinated
water, and other chemicals.
5. Only install with a Listed Class 2 DC LED driver.
6.
To avoid Voltage Drop, ensure wire gauge used with LED
Strip Light is sufficient to keep under 3% voltage drop.
7. Do not exceed maximum run recommended for Strip
Light.
8. Diode LED Strip Light is designed to be cut at designated
cut points only. Cutting anywhere other than the cut
points will result in damage to the Strip Light.
9.
Failure to follow safety warnings, and installation
instructions will void the warranty for this product.
SAFETY & WARNINGS
QUICK SPECS / MODELS
† Do not install product in environment outside listed
temperature.
DRY/WET LOCATION
COLOR-CHANGING
24VDC
UV RESISTANT
IP68
POWER SUPPLY
CLASS
2
24VDC +
GREEN
RED
BLUE
