2 OF 8
IG121620-3.0
AlphaTECH
®
LED Strip Light
INSTALLATION GUIDE
AlphaTECH
®
LED STRIP LIGHT
INSTALLATION GUIDE
INSTALLATION
TURN POWER OFF AT CIRCUIT
BREAKER
CHANNEL SIDE VIEW
SHOCK HAZARD!
May result in serious
injury or death.
Turn power OFF at circuit breaker prior to
installation
.
REQUIRED TOOLS
1
2
3
1. Phillips-head Screwdriver
2. Ruler (Recommended)
3. Wire Stripper (Recommended)
4. Mounting Channel, or (2) Mounting Clips per 12”.
5. (2) Screws per Mounting Clip
DETERMINE LOCATION TO INSTALL
COMPONENTS
1
3
2
4
INSTALLATION (CONT.)
Refer to
SYSTEM DIAGRAMS
1) Class 2 Driver
2) Control
3) Strip Light
WIRE GAUGE & VOLTAGE DROP
Ensure applicable wire is installed between driver, fixture,
and any controls in between. When choosing wire, factor in
voltage drop, amperage rating, and type (in-wall rated, wet
location rated, etc.)
TEST CONNECTION
Prior to mounting, attach to Class 2 LED Driver, turn on power and
test connection to ensure system is operating properly. Turn off
power again before mounting.
MOUNT AlphaTECH
®
LED STRIP LIGHT
Indoor/Outdoor Installation (pg. 3)
Underwater/Pool Installation (pg. 4)
4
5
*Note: There are several ways to install AlphaTECH
®
LED Strip Light.
Please follow one of the options listed below.
Note: AlphaTECH
®
Strip Light is available with the following
connections. Ensure Class 2 power supply is compatible with
connector prior to installation.
Bare Lead*
MIC Lead**
DC Lead**
*Must be used for pool/spa applications.
**For use in non-waterproof applications only.
1
2
