DIO PROBO Cure
User Guide
19
18
Using DIO PROBO Cure
How to use DIO PROBO Cure
①
Current UV LED Temperature
②
UV LED Level
③
UV Curing Level
④
Sterilization Button
⑤
UV Curing Button
⑥
Time
⑦
Curing Temperature Up/Down
⑧
Start/Stop
Control Pannel
②
⑥
⑦
⑧
③
④
⑤
①
Caution: In order to prevent damage to machine and output models,
do not set curing time for more than 5 minutes.
Main function
High capacity & Intensity UV LED Post Curing Machine.
Recommended Curing Time : Small model 2-3 min. Large model 5 min.
Selection of Sterilization and Curing functions (Dual selection available).
Setting of UV LED Power Level (1Lv-5Lv).
Achievement of best quality of curing by irradiation of 3 dimensional light
source in every direction and automatic turntable.
Achievement of high quality of curing by high reflectivity disc at the bottom of
the turntable and high permeability disk on the top of the machine.
High transmittance lens is on UV LED surface and high capacity UV light source
can reach the object to be cured.
Alarm function for Pause / Complete / Safety Functions.
Safety function that stops automatically when UV LED Safety temperature is
reached and door is open during operation.
LED Lifetime : 20,000 Hours.
How to Use
Start
- If you press the START/STOP button, curing starts with the [UV Level, Time]
value set and the UV LED of sterilization/curing is operated simultaneously.
When finished, the UV LED turns off and an alarm sounds.
- It is possible to set UV LED level and curing time before start.
- In order to prevent damage to machine and output models, do not set
curing time for more than 5 minutes.
Pause
- Pause and turn off UV LED when you press START/STOP button during
operation.
- Continue[Remaining time] and turn on UV LED when you press
START/
STOP button again.
Reset
- Press and hole START/STOP button to reset to default time and UV level.
How to Use
Check and set the control panel time of the top cover, UV LED level and
sterilization/curing function.
Open the door and place the product to be cured on the turntable.
Press START/STOP button to start curing.
When the set time is over and the alarm sounds, the curing is completed.
Open the door and check the curing status of the product.
