Dinstar DWG2000 Series, User Manual, Page: 37 / 50

DWG2000 GSM/CDMA/WCDMA User
Manual
37
Copyright @ 2015
Parameter Explanation
Index You can choose any one from 0 – 31, but an index cannot be used repeatedly.
Description You can enter any description you want.
Source Prefix The prefix of the source number
Source The source IP in the Operation

IP – Tel Operation interface
Destination Prefix The prefix of the destination number
Stripped Digits from
Left
The number of digits which are lessened from the left of the destination
number
Stripped Digits from
Right
The number of digits which are lessened from the right of the destination
number
Prefix to Add The prefix added to the destination number after its digits are lessened.
Suffix to Add The suffix added to the destination number after its digits are lessened
Number of Digits to
Leave from Right
The number of the retained digits which. are counted from the right of the
destination number
Note: You can only configure some of the parameters according to your needs.
Parameters (Source Prefix, Source IP, Source IP Trunk and Destination Prefix) are the triggering conditions
for number manipulation, while the remaining parameters (Stripped Digits from Left or From Right ,