Dinstar DAG3000-112S, User Manual, Page: 40 / 82

DAG3000-112S VoIP Gateway User Manual
33
Figure 3.10-3 SIP Parameter Configuration Interface
Explanation of SIP parameters:
SUBSCRIBE for MWI (Message
Waiting Indicator)
Whether to enable ‘ voicemail message waiting indicator ’ ; it is
realized in the way of NOTIFY
MWI Subscription Expires MWI subscription expiry time; Default value is 3600s.
Voicemail User ID The user ID for access to voicemail box
RFC3407 Support Whether to enable RFC3407 support.
IP-to-IP Call
If this parameter is enabled, user can dial IP address through a phone
to call destination gateway.
URI Includes user=phone
If this parameter is enabled, ‘ user=phone ’ will be contained in URI.
When calls are routed to PSTN network, the called number will be got
from user name. Default value is ‘not enable’ .
INVITE with”P -Preferred- Identity”
Header (RFC3325)
If this parameter is enabled, ‘ P-Preferred-Identit y’ Header will be
added in INVITE message for anonymous call (Support RFC3325).
Only Accept Call from ACL (SIP
server or IP Trunk)
If this parameter is enabled, the gateway only accepts incoming call
from SIP server only. Default value is ‘ not enable ’ .
Anonymous Call
If this parameter is enabled, ‘anonymous’ will be included in SIP
message.