Dinolift 10196, Operating Instructions Manual

Page: 43 / 59

43
As a precaution against power failure or
other malfunction of energy supply, the
lift is equipped with a manually operated
emergency descent system.
Always check the condition of the emergency
descent system before starting to use the lift.
NOTE Start by retracting the telescope
completely, after that, lower the boom and
last, turn the boom system.
The hand pump (A), the extension arm for
the pump (B) and the turning crank of the
boom (C) are located under the chassis
control centre. The active movement is
selected using the selector lever (D).
A
B
V
D
The emergency descent system can only be operated from the ground. If you are on the
platform, call for help to operate the system.
Operation:
1. Retracting the telescope
Turn the selector lever to the left. Using the
hand pump, retract the telescope completely.
2. Lowering the boom
Turn the selector lever to the right. Using the
hand pump, lower the boom completely.
Telescope
Lowering the boom
4. Turning of the boom
To turn the boom, place the crank on the
worm gear shaft in the opening in the plastic
cover of the turning device.
Turn the crank gently in the desired
direction.
5.3.4. In case of malfunction, when even the emergency descent system is not
operational
If not even the emergency system is working, try to warn other personnel present on the site
or call for more help. When help arrives, try to
• restore the power supply required for normal operation of the lift
• resume the lift's normal operation by other means
• rescue the person on the platform by other means