_______________________________________________________________________________________
17
6. Press “YES” to continue the firmware update or press “NO” to exit.
7. Under Windows environment, run the program “Hyper Terminal”
(Start
ĺ
Programs
ĺ
Accessories
ĺ
Communications
ĺ
Hyper Terminal).
8. Inside the “Port Settings” popup window, set the COM port as below:
Bits per second:9600 Data bits:8 Parity:None Stop Bits:1 Flow control:None
9. In the pulldown manual, select “Transfer
ĺ
Send File”. Select transmission protocol “Xmodem
(don’t select 1K Xmodem)”. Browse the firmware file directory and select the firmware file.
_______________________________________________________________________________________
18
10. Press the “YES” knob on processor.
11. The processor will try to establish a connection with PC.
12. Click the “Send” icon on “Send File” window.
13. When success in making connection with PC, processor will erase the program memory and
proceed the firmware updating.
_______________________________________________________________________________________
19
14. Now the processor is updating the firmware, please don’t turn off the power.
15. When firmware update completed, the system will restart.
16. If connection loss happened, the system will stop the updating. You have to restart from step 1
to repeat the whole process.
_______________________________________________________________________________________
20
What This Product Includes
(1) AGP-1
x1
(2) Value Pack:
Analog Sound Module
x3
Standard Pack: Analog Sound Module
x6
Deluxe Pack:
Analog Sound Module
x10
(3) Power Adapter
x1
(4) RS-232 Cable
x1
(5) Owner’s Manual
x1
Copyright © 2009-2012 Tech-in-Mind Electronics
All rights reserved. No part of this publication may be reproduced in
any form without the permission of Tech-in-Mind Electronics.
website: www.tech-in-mind.com e-mail: sales@tech-in-mind.com