Dino-Lite AM-311, User Manual

Page: 30 / 31

Dino-Lite Handheld Digital Microscope User’s Manual 30
Q2. Why cannot work, when connect to PC?
A: a. Check driver installation is completed.
b. The USB cable is connected to Dino-Lite Handheld Microscope and PC USB
port.
Q3. How to install driver?
A: a. Do not connect USB cable to Dino-Lite Handheld Microscope before driver
installation.
b. Place installation CD into CD-Rom driver, select “driver installation”.
Q4. If USB cable connected to Dino-Lite Handheld Digital Microscope before driver
installation?
A: Remove USB cable from Dino-Lite Handheld Digital Microscope for 5 sec., and
then plug it back to Dino-Lite Handheld Digital Microscope.
Q5. How to connect “DinoCapture” ?
A: Complete driver installation, connect USB cable to Dino-Lite Handheld Digital
Microscope, and then Execute “DinoCapture” application procedure.
Q6. How to uninstall driver ?
A: Remove USB cable from Dino-Lite Handheld Digital Microscope, execute
“uninstall” in application procedure “Dino Digital Microscope”.
Q7. When connecting to PC, why the picture is slow or unsmooth?
A: a. Probably your PC’s configuration is not sufficient enough. Please check the
system requirements as mentioned in this User’s Manual.
b. Probably your PC’s CPU or memory is overloaded by executing too many
application software. Try to shut down other application and restart your
system to release the memory.
c. Probably your system has being attacked by virus, which may
dramatically degrade your system’s performance.
Q8. What should we do, if Dino-Lite Handheld Digital Microscope is not working
normally?
A: Please reset the system by disconnecting all the cables from Dino-Lite
Handheld Digital Microscope. Wait for about 5 sec., re-connecting the cables to
restart.
Copyright
AnMo Electronics Corp. reserves all patents, trademarks, copyrights, and other