Dinli DL-100CC, Owner'S Manual

Page: 19 / 67

the low beam and the taillight. turn signal lights wink together.
Turn the switch to the “ “position to switch on “ “ At this position, all light will be turned out at the
the high beam and the taillight. once
Start switch
“” CAUTION:
The starter motor cranks the engine when this switch Turn on this switch when parking or there is special
is pressed. condition.
After the hazard switch is turned on, it will not rest.
NOTE :
Be sure to push the switch to “ “ to release it,
The headlight and taillight can be turned on only otherwise it may affect the traffic safety.
when the main switch is at the “ “ position. When the signal lights are winkling, the hazard switch
The headlight and taillight can be turned on only does not work.
when the engine is starting.
CAUTION:
See starting instructions prior to start engine.
(Please see page 36 for details)
18
4-D. Throttle lever WARING
The throttle lever is beside the right handlebar Potential hazard