Dini Argeo DGT1SP, User Manual, Page: 14 / 60

14
Optimized layout for A4 print.
USER_MAN_ENG_DGT1SP
Technical features
POWER SUPPLY 12 - 24 Vdc LPS or with class 2 power supply.
MAXIMUM ABSORPTION
(without load cells)
DGT1SP: 1 W
DGT1SP-AN: 2 W
DGT1SP-PB: 2 W
DGT1SP-ETHIP, DGT1SP-PRONET, DGT1SP-ETHCAT, DGT1SP-MODTCP: 4 W
DGT1SP-COPEN, DGT1SP-DEVNET: 4 W
OPERATING TEMPERATURE From -10°C to +40°C.
DISPLAY DIVISIONS 10000e, 2 x 3000e for legal weighing, expandable up to 800,000 for internal use (with a
minimum cell signal of 1.6 mV/V).
CONVERSION SPEED Up to 4800 conv. / sec with single channel.
MINIMUM VOLTAGE PER DIVISION 0.3 µV (approved transmitter) ; 0.03 µV (non-approved transmitter) .
COUNTING RESOLUTION 1,500,000 points (with input signal 3 mV/V).
DISPLAY 6 digits, h 8 mm (0.3").
SIGNALS 6 status indicator LED lights.
KEYPAD mechanical with 5 keys.
TARE FUNCTION Subtraction possible over the entire range.
LOAD CELL POWER SUPPLY 5 Vdc, 250 mA.
LOAD CELL CONNECTION 6 wires or 4 wires.
CONNECTABLE CELLS Up to 16 350 Ω cells.
CASE Made of plastic (ABS), suitable for DIN rail mounting (EN 60715 - DIN43880) or wall mounting.
SERIAL OUTPUTS 1 half duplex RS485 bidirectional port on terminal (versions DGT1SP, DGT1SP-AN).
1 PROFIBUS port on DB9 connector (DGT1SP-PB* version);
2 ETHERNET ports (versions DGT1SP-ETHIP*, DGT1SP-MODTCP*, DGT1SP-ETHCAT*,
DGT1SP-PRONET*);
1 CANOPEN port on 5-pole terminal (DGT1SP-CANOP* version);
1 DEVICENET port on 5-pole terminal (DGT1SP-DEVNET* version).
1 USB port (micro USB type B) → Virtual COM (Device).
* Fieldbus models are not equipped with port 485.
OUTPUTS / INPUTS 4 photomosfet NO or NC outputs:
max 60 Vdc 0.5 A max / 48 Vac 0.5A;
2 configurable inputs (bidirectional optocouplers): 12 - 48 Vdc;
Input reading and output update time: 1 msec;
16-bit analog output (DGT1SP-AN version).
Current: 0 - 20 mA / 4 - 20 mA. Voltage: 0 - 5 Vdc, 0 - 10 Vdc.
The maximum applicable resistance on the current output is 300 Ω
while the minimum applicable resistance on the voltage output is 1 kΩ.
LOAD CELL SENSITIVITY Maximum sensitivity of the connectable load cells: 6 mV/V.
FIELDBUS UPDATE RATES Up to 120 Hz.
CERTIFICATIONS Indicated on the EC Declaration of Conformity of the product.