DINGLI S06-E, Operators Manual With Maintenance Information

Page: 63 / 77

OPERATOR’S MANUAL
with Maintenance Information
Maintenance
59
6-pin Deutsch connector under the chassis
deck.
8 Securely install the platform control box
harness plug into the 6-pin Deutsch
connector of the ECU cable.
9 Open the down limit switch cover, tag and
disconnect the wires of the down limit
switch wire harness.
10 Turn the key switch to platform control.
11 Raise the platform and return the safety
arm to the stowed position.
12 Working at the platform controls, press the
lift function select button. Lower the
platform to the stowed position.
⊙
Result: The LED readout screen will show
code 18, an alarm sounds and the lift
function should operate. The machine is
functioning properly.
¤
Result: The LED readout screen does not
show code 18, the alarm does not sound
and the lift function should not operate.
Replace the down limit switch.
13 Press the drive function select button.
Attempt to drive the machine.
⊙ Result: The LED readout screen will show
code 18, an alarm sounds, and the steer
and drive functions should not operate. The
machine is functioning properly.
¤ Result: The LED readout screen does not
show code 18, the alarm does not sound,
and the steer and drive functions operate.
Replace the down limit switch.
14 Press the lift function select button. Raise
the platform approximately 0.3 m.
⊙ Result: The LED readout screen will show
code 18 and an alarm sounds. The
machine is functioning properly.
¤ Result: The LED readout screen does not
show code 18 and the alarm does not
sound. Replace the down limit switch.
15 Raise the platform until the pothole guards
are deployed.
⊙
Result: The LED readout screen does not
show code 18 and the alarm does not
sound. The machine is functioning
properly.
¤
Result: The LED readout screen shows
code 18 and an alarm sounds. Replace the
down limit switch.
16 Raise the platform until the distance of the
two sets of scissor at least 0.5m.
17 Lift the safety arm, move it to the center of
the scissor arm and rotate down to a
vertical position.
18 Lower the platform until the safety arm
rests securely on the link. Keep clear of
the safety arm when lowering the platform.
Crushing hazard. Keep
hands clear of the safety arm when lowering
the platform.
19 Turn the key switch to the off position.
20 Disconnect the platform controls from the
ECU cable.
21 Securely install the connector of the ECU
cable into the platform control cable.
22 Working at the platform, securely install
the connector of the platform controls into
the platform control cable.
23 Securely connect the two wires of the
down limit switch to wire harness.
24 Close and install the switch cover.
25 Turn the key switch to platform control.
26 Raise the platform and return the safety
arm to the stowed position.
27 Lower the platform to the stowed position.