DINGLI JCPT DCS Series, Training Manual

Page: 82 / 87

培训手册
Training Manual
常规保养
Daily Maintenance
JCPT- DCS
www.cndingli.com
9-2
1.
液压油更换（
Hydraulic oil change
）
更换和测试液压油对于机器的性能表现和使用寿命是非常重要的。脏的液压油和滤芯可以导致机器
性能不好，连续使用可能会导致零件损坏，如果在极端恶劣的环境下工作，需要更换液压油的频率
要比平常环境多很多。（
Replacement and testing of the hydraulic oil is essential for good
machine performance and service life. Dirty oil and suction strainers may cause the machine
poorly and continued use may cause components damage. Extremely dirty conditions may
require oil changes to be performed more often.
）
建议每两年或者机器运行
2000
个小时，更换液压油。（
Every 2years or 2000 hours of operation,
hydraulic oil need to be changed.
）
液压油规格：低凝抗磨液压油
46
号（
L-HV46
）
Hydraulic oil specifications: L-HV46
具体更换步骤（
Replacement procedure
）：
1)
断开机器上的电池组。（
Disconnect the battery pack from the machine.
）
触电
/
烧伤危险（
Electrocution / burn hazard
）：
在带电的电路中操作可能会导致严重伤害或死亡。操作时取下戒指，手表和其它饰品。
（
Contact with electrically charged circuits could result in death or serious injury.
Remove all rings, watches and other jewelry.
）
2)
打开液压动力单元安装托盘。（
Open the power unit module tray.
）
3)
卸下液压油箱底部的放油塞。（
Remove the oil drain plug at bottom.
）
4)
将油放到一个合适的容器中。（
Drain all of the oil into a suitable container.
）
身体受伤的危险（
Bodily injury hazard
）：
喷射出来的液压油可以穿透皮肤。缓慢松开液压接头，让油压逐渐减弱。不要让油喷射出来。
（
Spraying hydraulic oil can penetrate and burn skin. Loosen hydraulic connections
very slowly to allow the oil pressure to dissipate gradually. Do not allow oil to squirt or
spray.
）
5)
清洁溢出的液压油，正确使用放出来的液压油。（
Clean up any oil that may have spilled.
Properly discard the used oil.
）
6)
使用温和的溶剂清洁液压油箱，彻底风干。（
Clean the inside of the hydraulic tank using a
mild solvent. Allow the tank to dry completely.
）
7)
拧紧放油塞。（
Tighten the drain plug.
）