培训手册
Training Manual
操作前检查
Pre-operation Inspection
JCPT- DCS
www.cndingli.com
3-7
⊙
结果:平台应下降。当平台下降时,下降警报应鸣响。(
Result: The platform should lower.
The descent alarm should sound while the platform is lowering.
)
测试转向(
Test the Steering
)
注意:执行转向和驱动功能测试时,应站在平台上,面向机器的转向端。
Note: When performing the steer and drive function tests, stand in the platform facing the steer
end of the machine.
27)
按下驱动功能选择按钮,指示灯亮。(
Press the drive function select switch.
)
28)
按住控制手柄上的功能启用按钮。(
Press and hold the function enable switch on the control
handle.
)
29)
按照控制面板上的左向箭头所指示的方向,按下控制手柄顶部的拇指摇杆开关。(
Depress
the thumb rocker switch on top of the control handle in the direction identified by the blue left
arrow on the control panel.
)
⊙
结果:转向轮应按照控制面板上左向箭头所指示的方向转动。(
Result: The steer wheels
should turn in the direction that the blue left arrow points on the control panel.
)
30)
按照控制面板上右向箭头所指示的方向按下拇指摇杆开关。(
Depress the thumb rocker
switch in the direction identified by the white right arrow on the control panel.
)
⊙
结果:转向轮应按照驱动底盘上右向箭头所指示的方向转动(
Result: The steer wheels should
turn in the direction that the white right arrow points on the control panel.
)
测试驱动和刹车功能(
Test Drive and Braking
)
31)
按住控制手柄上的功能启用按钮。(
Press and hold the function enable switch on the control
handle.
)
32)
按照控制面板上向上箭头指示的方向,缓慢移动控制手柄直至机器开始移动,然后将手柄恢复
到中心位置。(
Slowly move the control handle in the direction indicated by the blue up
arrow on the control panel until the machine begins to move, then return the handle to the
center position.
)
⊙
结果:机器应按照控制面板上向上箭头所指示的方向移动,然后突然停止。(
Result: The
machine should move in the direction that the blue up arrow points on the control panel, then
come to an abrupt stop.
)
33)
按住控制手柄上的功能启用按钮。(
Press and hold the function enable switch on the control
handle.
)
34)
按照控制面板上向下箭头指示的方向,缓慢移动控制手柄直至机器开始移动,然后将手柄恢复
到中心位置。(
Slowly move the control handle in the direction indicated by the yellow down
arrow on the control panel until the machine begins to move, then return the handle to the
center position.
)
Summary of Contents for JCPT DCS Series
