ULM–70
©
Dinel, s.r.o.
15
B A S I C S E T T I N G S
S E R V I C E
D I A G N O S T I C
C L O N E S E T T I N G S
P A S S W O R D
I N F O
DIAGNOSTICS
It contains information about the actual temperature inside the tank
(or about the compensated temperature) "TEMPERATURE" and
current flowing through the loop "CURRENT". If the temperature
compensation ("MEDIUM TEMPERATURE") is activated, the cor-
rected temperature is displayed.
T E M P E R A T U R E
C U R R E N T
T E M P E R A T U R E
+ 2 3 ° C
C U R R E N T
1 7 . 3 0 m A
The temperature is measured inside the tank
where the level meter is installed.
If the temperature of the measured medium is
different, we recommend you to carry out the
temperature compensation "MEDIUM TEM-
PERATURE" because of accuracy (see p. 15).
Then the displayed temperature is an average
value from the temperature set in the "MEDIUM
TEMPERATURE" and the actual temperature
measured by the sensor.
T E M P E R A T U R E
C U R R E N T
CLONE SETTINGS
This mode is intended for
copying
of the level meter (ULM–70
body)
configuration into the display module
(DM–70) and
back. The display module can then be removed from the level
meter body and put into another level meter and make there the
settings transfer (cloning).
The "CLONE SETTINGS" mode transfers all data, excluding setting of the "Teaching" and HART
®
.
B A S I C S E T T I N G S
S E R V I C E
D I A G N O S T I C
C L O N E S E T T I N G S
P A S S W O R D
I N F O
C L O N E S E T T I N G S
N O W C L O N I N G
C L O N E S E T T I N G S
S E N S O R
D I S P L A Y
M O D U L E
D I S P L A Y
M O D U L E
S E N S O R
→
→
1.
Press
to enter the menu and select the item "CLONE SETTINGS". Copying of the settings
from the body of the level meter to display module is done by selecting "SENSOR
→
DISPLAY
MODULE". To transfer the settings from the display module to another level meter select the item
DISPLAY MODULE
→
SENSOR.
2. The selected mode starts by pressing button
During transmission the display shows "NOW
CLONING"
.
3.
After completing the process in the middle of the screen displays "DONE". It is then possible to
leave the menu and the mode by pressing the button
.
C L O N E S E T T I N G S
S E N S O R
D I S P L A Y
M O D U L E
D I S P L A Y
M O D U L E
S E N S O R
→
→
A R E Y O U S U R E ?
9 .3 . a
dditional
functions
Additional functions include modes to display temperature in the tank or to find out the actual flow-
ing current in the loop. Besides, to lock modifications using a password and information about the
level meter version. All of the functions are accessible from the main menu.
