RFLS–28
©
Dinel, s.r.o.
4
All operations described in this instruction manual have to be carried out by trained personnel
or by an accredited person only. Warranty and post warranty service must be exclusively
carried out by the manufacturer.
Improper use, installation or settings of the sensor can lead to crashes in the application
(overfilling the tank or damage to system components).
The manufacturer is not responsible for improper use, loss of work caused by either direct
or indirect damage, and for expenses incurred at the time of installation or during the period
of use of the sensor.
To ensure maximum safety of control processes, we have defined the following safety instructions and
information. Each instruction is labelled with the appropriate pictogram.
Alert, warning, danger
This symbol informs you about particularly important instructions for installation and opera-
tion of equipment or dangerous situations that may occur during the installation and op
-
eration. Not observing these instructions may cause disturbance, damage or destruction of
equipment or may cause injury.
Information
This symbol indicates particularly important characteristics of the device.
Note
This symbol indicates helpful additional information.
Used symbols
Safety
