PCU–100 GSM
©
Dinel, s.r.o.
4
All the operations described in these operating instructions must be made only by trained
personnel or by an authorised person. Warranty and post-warranty repairs must be carried
out exclusively at the manufacturer. Incorrect sensor use, assembly or configuration may
cause accidents in the application (tank overfilling or damage to the system components).
The manufacturer is not responsible for the improper use, working losses incurred by either
direct or indirect damage and the expenditure incurred during the installation or the use of
the sensor.
In order to ensure maximum safety of control processes, we have defined the following safety and
information instructions. Each instruction is marked with a corresponding pictogram.
Caution, warning, danger
This symbol informs about particularly important instructions for the installation and operation
of the device or dangerous situations that may occur during installation and operation. Ignor-
ing these instructions may be the cause of the fault, damage to or destruction of the device
or may cause damage to health.
Information
This symbol indicates particularly important device characteristics and recommendations.
Note
This symbol indicates the useful additional information.
Symbols used
Safety
The extension module to the PCU-100 enables connection and sending of measured data
to the server www.dinel.cloud, where this data is available from the Internet and where the
data can be displayed in the form of graphs, tables and other graphic elements in the form of
widgets
(see chapter 6. Web interface dinel.cloud, page 10).
The module is inserted into the socket on the lower (source) printed circuit board PCU-100. When
ordering a PCU-100 with a GSM module, this module will already be installed.
The module can be used with the PCU-100 -_- I and PCU-100 -_- H variants. Both variants can be
with or without a display.
1 . Basic description PCU-100 with GSM module
Summary of Contents for PCU-100 Series
Page 2: ......
