21
©
Dinel, s.r.o. PCU–100
GSM
7 . SMS notification
The PCU-100 allows sending an SMS to the selected telephone number with a notification if the
defined value of the measured quantity is exceeded. This can be used in various cases, especially
used to respond more quickly to severe system errors, when the probe connected to the PCU-100
measured a value that should not normally occur and often requires the intervention of the operator
and a possible system check that will lead to eliminate the problem.
The user defines the interval using 2 values (minimum and maximum). As soon as the measured
value is outside this interval, the first SMS with a notification will be sent. The SMS has the following
form:
PCU-100- <serial number>: ALARM ON, <time>, <measured value>
Example:
PCU-100-20001: ALARM ON, 2020-06-23T06:19:25, 3859
If the measured value remains in this interval. No further notifications are sent.
As soon as the measured value changes to the defined interval, while in the previous measurement
it was outside the interval, a second SMS with a notification will be sent. The SMS has the following
form:
PCU-100- <serial number>: ALARM OFF, <time>, <measured value>
Example:
PCU-100-20001: ALARM OFF, 2020-06-23T06:48:16, 3368
If you have more than 1 device PCU-100 with GSM module, all devices can be in one account or
you can have a separate account for each device or a combination of these two variants (ie multiple
users access several devices, for each user it is possible to select which device has the ability to
monitor). These variants and requirements must be specified when ordering.
Summary of Contents for PCU-100 Series
Page 2: ......
