Hardware Manual
SAFEONE DNSR-2R Time Delay Relay
9
2 Safety
2.3
Intended use and improper use
The product has exclusively been developed for use for the purpose described here. The
specifications set out in these operating instructions must be strictly complied with.
• The DNSR-2R is a switching device for enabling and time delayed enabling of control circuits.
• The safety module is intended for use on machines and plants to prevent hazards
from arising.
Any other form of use is regarded as improper use.
If the product is
• not used as intended,
• improperly maintained or
• incorrectly operated,
the manufacturer will not assume any liability for any damage that results. In this case,
the risk shall be borne exclusively by the user.
2.3.1
Certification data
The product is certified as safety equipment in accordance with:
• DIN EN ISO 13849-1:2016-06,
Category 3, PLd
• DGUV Test: GS-ET-20:2016-10
• EC type examination certificate
Notified body:
DGUV Test
Prüf- and Zertifizierungsstelle
Elektrotechnik, Fachbereich: ETEM
Gustav-Heinemann-Ufer 130
50968 Cologne, Germany
(Reg. no.: 0340)
• EMC Directive
Certified by:
ELMAC GmbH Bondorf
• CNL, USL
File E227037
• QM system certified as per
DIN EN ISO 9001:2015
Certified by:
DQS GmbH
60433 Frankfurt am Main, Germany
NOTE
You can download the certificates from our website:
R
https://www.dina.de/downloads
