2.4
Rear Panel Features
dimtel
dimtel
2.4
Rear Panel Features
1
3
2
4
5
6
Figure 3: Rear panel features
1) Voltage selection switch
Slide switch for selecting appropriate mains
voltage: 115 or 230 V.
2) Power entry socket
IEC-320 power input socket. Always use an outlet
with properly connected protective ground.
3) GPIO
This 68-pin connector provides 32 low-voltage transistor-transistor
logic (LVTTL) signals for future expansion.
4) PS/2 keyboard
Connect PS/2 keyboard for the initial setup of the iGp-
5120F.
5) Monitor output
Connect a monitor for the initial setup of the iGp-
5120F.
6) Network
This RJ-45 connector is used to connect the iGp-5120F to the
control network. All control and data acquisition communications with
the unit are performed via this network connection.
8 of 58