XMS(N)
AUTOMATIC
XMX(N)
MANUAL
STORAGE HEATER RANGE
MODELS: XMX706N
- 6kWh
XMS/X712N
- 12kWh
XMS/X718N
- 18kWh
XMS/X724N
- 24kWh
INSTALLATION
AND
OPERATING
INSTRUCTIONS
IMPORTANT
PLEASE READ THIS LEAFLET CAREFULLY AND RETAIN FOR FURTHER USE.
NOTE ALSO THE INFORMATION GIVEN ON THE HEATER
Ê
The Installation must be carried out by trained personnel.
Ê
A means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
Ê
The heater must not be installed immediately below a socket outlet.
Ê
The heater is not suitable for connection to a 30A ring circuit.
Ê
Do not position the heater under windows where curtains can contact the heater casing.
Ê
WARNING - THE SURFACES ON THIS HEATER CAN BE HOT.
Ê
This heater meets EN60-335 safety requirements. However, any heater type becomes hot in normal
operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur.
Ê
WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE PRESENT THIS APPLIANCE
MUST BE ADEQUATELY GUARDED. Contact your installer or the manufacturer for further advice.
Ê
This appliance is very heavy and must be securely fixed to a wall. DO NOT UNDER ANY
CIRCUMSTANCES ATTEMPT TO MOVE OR REPOSITION THIS HEATER WITHOUT SEEKING
EXPERT ADVICE.
Ê
To maintain stability, it is essential that the heater is placed on a level surface.
Ê
This heater must be installed where it is impossible for switches and other controls to be touched by a
person in a bath or shower.
Ê
IMPORTANT - Due to the newness of materials the heater will produce a slight smell for the first few
days of operation. ROOMS MUST BE WELL VENTILATED AND YOUNG CHILDREN, CAGED BIRDS,
OR PERSONS WITH RESPIRATORY COMPLAINTS MUST NOT REMAIN IN CLOSE PROXIMITY
TO THE HEATER DURING THE FIRST 48 HOURS OF THE COMMISSIONING PERIOD.
Ê
IF, DURING ANY REASSEMBLY OF THE HEATER, A PART OF THE THERMAL INSULATION
SHOWS DAMAGE OR DETERIORATION WHICH MAY IMPAIR SAFETY, IT SHOULD BE REPLACED
BY AN IDENTICAL PART.
