Dimplex WI 40CG, Installation And Operating Instructions Manual

Page: 5 / 36

5
TRANSPORT
A lift truck can be used for transporting the heat
pump over smooth surfaces. Carrier belts should
be used where it must be transported across
uneven surfaces or through staircases. The belts
can be inserted directly through the wooden grate.
As an alternative the unit may be lifted by means
of eyebolts that can be screwed into the corners
of the base frame.
The heat pump is not attached to the
wooden grate.
The heat pump must not be inclined
by more than 45° (to any side).
5
ACCESSORIES
TRANSPORT
CAUTION !
CAUTION !
ACCESSORIES
4.1 Control cable
Two control cables serve to interconnect the heat
pump control and the basic control unit as well
as the basic control unit and the terminal box of
the heat pump. These cables are available in
several lengths.
4.2 Heat pump control
The use of a heat pump control from our product
line is mandatory for the operation of your water-
water heat pump. The heat pump control is a
comfortable electronic control device. It is avail-
able as an accessory. The heat pump control
regulates and monitors the entire heating system
in regard to outdoor temperatures, hot water
heating process and safety-relevant equipment.
The functional method and the operation of the
heat pump control is described in detail in the
accompanying Installation and Operating Instruc-
tions.
4
45°
45°
Eye bolt