Dimplex UPH 120-32 PK, Installation And Operating Instruction, Page: 15 / 44

452115.66.46 · FD 0004 EN-3
UPH 120-32PK English
4 Intended use
This device must not be operated by persons (including chil-
dren) with limited physical, sensory or mental abilities or lacking
the necessary experience and/or knowledge.
Children must be supervised to ensure that they do not play
with the device.
The UPH 120-32 PK high efficiency pump is used for circulat-
ing liquids (not oils or oil-based liquids, not food) in:

Domestic hot water heating systems
 Air conditioning, cooling and cold water circuits

Heat pumps, brine circuits
 Closed industrial circulating systems
Approved media to be pumped are heating water in accord-
ance with VDI 2035, water/glycol mixtures in a ratio of 1:1.
When glycol is added, the output data of the pump must be ad-
justed based on the higher viscosity.
CAUTION!
!!
Danger of damage to health!
The materials used in the pump can cause damage to health
as they are not approved for use in domestic water circulating
systems. The pump is not approved for use in pure domestic
water systems.
5 Information on the product
5.1 Model code
Table 5.1:
5.2 Technical data
Example: UPH 120-32 PK
UPH = High efficiency pump
= Electronically regulated
30 = Screw connection
30 (G 2“AG)
1-12 = adjustable controlling range of the
delivery height in (m)
PK = P = PWM input signal
K = constant controller or

p-c
(pressure constant) and

p-v
(volume constant)
Max. discharge rate 10 m³/h, see characteristic curve
Max. delivery height 12 m, see characteristic curve
Line voltage 1~230 V ±10 % according to DIN IEC 60038
Nominal current 0.16 - 1,37 A
Frequency 50/60 Hz
Insulation class F
Degree of protection IP X4D
Power consumption P1 16 - 310 W, see characteristic curve
Nominal widths see cap. 5.1 Model code
Connecting flange see cap. 5.1 Model code
Permissible
ambient temperature
Table 5.2 on page 4
Max. relative humidity

95 %