Dimplex Smart-RTC+ RTM Econ A, Installation And Operating Instruction, Page: 21 / 36

452115.66.39 · FD 9707 EN-9
Smart-RTC+ English
4.5.2 Heat pump manager
The function of the Smart-RTC+ room control must be activated
in the heat pump manager menu.
The preconfiguration menu can be accessed by
 simultaneously pressing (for approx. 5 seconds) the key
combination (ESC) and (MENU).
 The preconfiguration is exited via the (ESC) key.
An overview of the RTM Econ A⁄U in the BUS is available in the
menu "history - add-ons - Smart-RTC+".
The "history" menu can be accessed by
 pressing the MENU key (for approx. 5 seconds) and making
the selection with the arrow keys
 The menu is exited via the (ESC) key.
NOTE
º
If communication cannot be established, the address set on the
RTM Econ A
⁄ U and the BUS line must be checked. If these settings are
correct, a 120 Ohm terminating resistor and a ferrite core if necessary
must be mounted too.

Preconfiguration of all system components Setting range

Is heating circuit 1 used for heating or for heating and silent cooling? Heating
Heating/silent cooling
Heating
Control by
The following heating regulation options can be selected for heating circuit 1:
 return temperature control depending on the room
temperature of a reference room
Room temperature


What hardware is used for the heating room control?
Smart-RTC+
Cooling
Room control
What hardware is used for the cooling room control?
Smart-RTC+
Numbers
Room control
How many Smart-RTC+ are present in heating/cooling circuit 1?
1 ... 10
Symbol Description
Display
RTM Econ not selected
RTM Econ present and active
RTM Econ in shock ventilation
Searching for RTM Econ
RTM Econ not found
RTM Econ reset, re-initialisation
Reset RTM Econ time programs
X
RTM Econ
50
53
56 51
54
57 52
55
58
59
X X X X
X X
X X X