background image

   Child Lock

To lock the controls press 

Back

 and 

Enter

 for three seconds. 

Child Lock

 will 

appear at the bottom of the screen. To unlock the control repeat the action of 
pressing 

Back

 and 

Enter

 for three seconds.

Press and hold 

Enter

 for five seconds to display the 

User Information

 menu;

SP Range

 (set point) allows adjustment of the maximum temperature.

Open Window

 detection (OW). When enabled the appliance will reduce the 

target room temperature to limit the energy wasted when a window is opened.

Occupancy

 detection (OD) reduces the room temperature when the room 

is unoccupied. 

Note

:  an additional accessory is required for this function. 

Available summer 2015.

EcoStart

 (ES)

 – to achieve the desired temperature at the onset of the timed 

Comfort On

 period the appliance anticipates when it needs to start heating 

prior to the onset of the timed ‘on’ period. E.g. room is 16

°

C, with 21

°

C at 7am 

set on the timer. With ES on the control will start to heat the room before 7am, 
reaching 21

°

C at this time. With ES off the heater will start to heat the room at 

7am and will reach 21

°

C after this time.

Factory

 reset returns all settings to the factory presets.

NOTE

: The controls cannot 

be adjusted when child lock 

is active.

NOTE: Open Window 

detection is enabled 

by default. EcoStart is 

disabled by default. 

Child Lock

User Info

SP Range

Open Window

Occupancy

EcoStart

Factory Reset

  

     User Information

17

Summary of Contents for QRAD150





















Reviews: