Electrical Connection
Unpacking
Follow any pack operating instructions carefully. Remove the contents of the carton very carefully. Retain all packaging for future use.
Preparing For Use
The radiator may only be used free standing with the feet fitted
The necessary feet and screws are provided, pa
cked with the radiator.
Free Standing on Feet (see Fig.2)
Never use the radiator free standing without the feet fitted. Lay the radiator on its front on a table or similar and offer each foot up to its mounting
bracket. Place each foot over the attachment bosses and secure it using the screws and washer provided
Stand the radiator on its feet and place it in position ready for use. The heater should always be used on a flat stable surface.
Ensure there is at least 75 mm of clear space around the radiator
Installation
Fig. 1
Fig. 2
Fig. 3
WARNING: This radiator carries a warning ‘DO NOT COVER’ to alert the user to the risk of overheating that exists if the radiator is
accidentally covered
WARNING: THIS APPLIANCE MUST BE EARTHED
This heater must be used on an AC ~ supply only and the voltage marked on the heater must correspond to the supply voltage. This
heater is fitted with a rewirable plug incorporating a a 13 amp fuse. In the event of replacing the fuse in the plug supplied, a 13 amp fuse
approved by ASTA to BS 1362 must be used. If any other type of plug is used, a 13 amp fuse must be fitted in the plug, the adaptor, or at
the distribution board.
IMPORTANT: If the plug is not suitable for your socket, the 13 amp plug should be removed.
Before wiring the appropriate plug, please note that the wires in this mains lead are coloured in accordance with the following code:
GREEN AND YELLOW:
EARTH
BLUE:
NEUTRAL
BROWN:
LIVE
Connect the GREEN AND YELLOW wire to the terminal marked ‘E’ or by the earth symbol, or coloured GREEN or GREEN AND YELLOW.
Connect the BLUE wire to the terminal marked ‘N’ or coloured BLACK
Connect the BROWN wire to the terminal marked ‘L’ or coloured RED
NOTE: Although this heater is manufactured to comply with the relevant safety standards, certain types of carpets could become
discoloured by the temperatures under a portable heater. If you are concerned about this, we recommend that you contact the carpet
manufacturer for guidance. Alternatively, stand the heater on a suitable base to shield the carpet
Model
Watts
A
B
OFX 075E
750
570
683
OFX 100E
1000
840
683
OFX 150E
1500
1105
683
OFX 200E
2000
1373
683
B
A
220
b
a
