background image

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR 

FUTURE REFERENCE. 

Note also the information presented on the appliance

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/

OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your product for the first 

time and keep them in a safe place.

•  When using electrical appliances, basic precautions should always be followed to 

reduce the risk of fire, electrical shock and injury to persons, including the following: 

•  If the appliance is damaged, check with the supplier before installation and operation.
 

Do not use outdoors.

 

Do not use in the immediate surroundings of a bath, shower or a    

  swimming 

 

pool.

 

Do not use this heater if it has been dropped.

 

Do not use if there are visible signs of damage to the heater.

 

Use this heater on a horizontal and stable surface, or fix it to the wall, as  

  applicable.
• 

Do not locate the appliance immediately below a fixed socket outlet or connection 
box. 

•  This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning use of the appliance by 
a person responsible for their safety.

•  Children should be supervised to ensure that they do not play with the appliance.
•  Do not use this appliance in series with a thermal control, a program controller, a 

timer or any other device that switches on the heat automatically, since a fire risk 
exists when the appliance is accidentally covered or dis-placed.

•  In the event of a fault, unplug the appliance. 
•  Unplug the appliance when not required for long periods.
•  This product is only intended for

 INDOOR RESIDENTIAL

 applications only.

•  DO NOT

 cover cord with carpeting, throw rugs, runners, or similar coverings.

•  DO NOT

 route cord under furniture or appliances. Take care to position the cord 

away from traffic areas and where it will not be a tripping hazard.

•  This appliance must not be used in a bathroom.
•  Although this appliance complies with safety standards, we do not recommend its 

use on deep pile carpets or on long hair type of rugs 

•  The appliance must be positioned so that the plug is accessible.
•  If the supply cord is damaged it must be replaced by the manufacturer or service 

agent or a similarly qualified person in order to avoid a hazard.

•  Keep the supply cord away from the front of the appliance.
•  Do not use this heater in small rooms when they are occupied by persons not 

capable of leaving the room on their own, unless constant supervision is provided.

2

Summary of Contents for OCR15FA













Reviews: