background image

In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.

© 2011 Dimplex North America Limited

1367 Industrial Road    Cambridge ON Canada N1R 7G8
1-888-346-7539    www.dimplex.com

2

 

Warranty

The Manufacturer warrants the heating elements and components of the 

enclosed product against any defect in material or workmanship for a period 

of one year from the date of purchase.  In full satisfaction of any claims 

under this Warranty the Manufacturer will repair or replace without charge, in 

its factory or in the field as it alone may decide, any parts which in its opinion 

are defective.
The Manufacturer shall not be responsible for any transportation or shipping 

costs in relation to such repair or replacement except as specifically 

assumed by it.  Misuse of this product or repairs by persons other than the 

Manufacturer’s authorized personnel without the Manufacturer’s written 

approval, will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether 

expressed or implied including but not limited to those of merchantability or 

fitness for purpose and shall constitute the sole remedy of the Purchaser 

and the sole liability of the Manufacturer in respect of the sale of the product, 

whether in the nature of breach or breach of fundamental term, or of 

negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or consequential 

damages or for any damages resulting from removal or replacement of a 

heater subject to warranty claim without the Manufacturer’s authorization.
This Warranty is transferable by the original  consumer purchaser of the 

product.  Any claims under this Warranty must be submitted in writing to 

the Service Manager, Dimplex North America Ltd., 1367 Industrial Rd., 

Cambridge, Ontario N1R 7G8, Canada.

 

Warning:  

To reduce the risk of fire or electric shock, 

always switch off the unit and wait 10 minutes to allow it 

to cool before attempting any maintenance or cleaning. It 

is recommended that the heater is cleaned periodically, in 

order to avoid dust blocking the grille or ventilation.

Once the heater is de-energized and has cooled down, 

remove the outer cover and wipe the unit with a soft, damp 

cloth.  Gently clean the blades of the fan to remove any build 

up of dirt.

!

  nOTE:  

Do not use abrasive cleaners or spray liquids on 

the unit surfaces.

  CaUTiOn:  

Make sure to reinstall the cover on the unit in 

order to protect the heating element against dust and dirt.

 

Warning: 

The user can perform cleaning ONLY.  All 

other servicing should be performed by qualified service 

personnel.

 

maintenance

The unit will turn On and Off based on the setting of the 

installed thermostat.  There is a toggle switch located on 

the unit, which allows for two different modes of operation 

(Figure 4):

Fan Only - When the thermostat signals the unit to turn 

• 

on the fan will circulate the air.
Heater & Fan - When the thermostat signals the unit to 

• 

turn on both the fan and the heater will be activated and 

a pilot light will illuminate, beside the switch on the unit.

 Operation

Replace the wiring compartment cover and lock in place 

11. 

with 2 screws.
Secure the unit to the bracket with screw.

12. 

Replace the grille box and secure with screws.

13. 

Figure 3

Figure 4

Reviews: