Technical specification
•
Power supply 220-240V50-60Hz
•
Heater: Wattage max 1500w, LED light: 7W max
•
Net weight 6.0 kg
•
Insulation class I
•
Height 110 cm
Assembly Instructions
Unpack the heater making sure that all the items are
present, that there are no components left in the box and
that the heater head is free from any packing material. The
heater must be handled with care to avoid any damage.
Do not connect the heater to electrical supply if any of the
components or the power cord is damaged in any way.
Method
Ensure you have removed all packing materials and then
fix the base to the heater pole using the 3 pcs M8 * 25 mm
screws provided. Tighten screws by hand using the allen
key provided, see below.
Operation
NB: Before connecting/operating the appliance please
ensure that you remove the protective cover
(and store
it away carefully).
Product must never be operated with
the protective cover fitted.
Connect the power cord to a 13 amp supply that is located
in a safe dry area. The switches on the heater are used to
control the operation of the element and of the light and
speaker on the top of the heater.
The switch on the left turns on and off the light and the
speaker. The switch on the right turns on and off the
element. The unit must be securely grounded during
operation.
Although the heater is shower proof, do not use when
raining or in wet conditions. Always disconnect the power
cord from the electrical supply when the patio heater is not
in use, you should also cover it with the protective cover
provided when not in use,
NB: You must allow the product to cool down
completely after use before fitting the protective cover.
Remote Control
This appliance is supplied with a remote that can be used
to control the light at the top of the column.
Please remove the plastic battery insulation sheet before
using the remote (see diagram).
The battery is a Lithium Cell type CR2025.
The remote can turn the light on/off, change the
brightness, the colour and mode of operation, see below
button operation instructions.
SPEAKER OPERATION
Pair your device with the speaker which will identify itself
as ‘Sun & Sound’.
The speaker controls are on the top of the unit, see below
operating control instructions.
Care and Maintenance
The head of the heater is at a high temperature during
operation. Disconnect the heater from the electrical supply
and wait until it cools before cleaning.
Clean the outside of the heater with a damp cloth. Never
use corrosive or solvent cleaners or immerse in water.
Any maintenance or repairs including replacement of the
halogen tube should only be carried out by a qualified
electrician or by a recommended service centre.
Recycling
The crossed bin symbol on the appliance
indicates that the product, at the end of its life,
must be disposed of separately from domestic
waste, either by taking it to a separate waste
disposal site for electric and electronic
appliances or by returning it to your dealer when you buy
another similar appliance. The user is responsible for taking
the appliance to a special waste disposal site at the end of
its life. If the disused appliance is collected correctly as
separate waste, it can be recycled, treated and disposed of
