- 8 -
The wine cooler should be placed in dry and ventilated room. The location of
the wine cooler should not be placed in direct sunshine. The wine cooler
should be far away from heating sources, such as: cooking stove or heating
radiator. If the wine cooler has to be placed near heating source, please adopt
proper heating insulation board for insulation or keep the wine cooler at least
the following minimum distances away from the heating sources:
For electric stove: 3 cm. For oil or coal stove: 30 cm.
To ensure proper ventilation for your wine cooler, allow for 3cm space on each
side between walls, 3cm space between back of your wine cooler and the wall,
and 3cm space between counter top and the roof or ceiling.
Notice
If the room temperature is lower than +16°C, the wine cooler may not be able
to work normally, because if the room temperature is too low, the temperature
sensitive goods might be damaged.
If the room temperature and humidity is too high, the glass door of the wine
cooler may have condensation.
Connect Wine Cooler with Power Source
After placing the wine cooler, please wait for at least two hours before the
wine cooler can be operated. This is because the engine oil in the compressor
may flow into the cooling system during the transportation process.
Before the first running, please clean the inside chambers of the wine cooler
(Please see the section on cleaning).
The power socket should be reachable. The wine cooler should be connected
with 220-240V/50Hz AC power.
Warning
Improper use of the earthed plug can result in the risk of electrical shock. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.