9
Maintenance
WARNINg:
Disconnect power
before attempting any mainte-
nance or cleaning to reduce the
risk of fire, electric shock or dam-
age to persons.
LIgHT BULB REPLACEMENT
Allow at least 5 minutes for light
bulbs to cool off before touching
bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced
when you notice a dark section of
the flame or when the clarity and
detail of the log exterior disap-
pears. There are two bulbs under
the log set which generate the
flames and embers.
TOOL REQUIREMENTS
Slot screw driver
HELPFUL HINTS
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
UPPER LIgHT BULB REQUIRE-
MENTS
Quantity of 1 clear chandelier or
candelabra bulbs with an E-12
(small) socket base, 7 watt rating.
UPPER BULB REPLACEMENT
Open door by turning the han-
1.
dle ¼ turn to the right or left.
Locate the upper bulb brack-
2.
et.
Unscrew the bulb counter
3.
clockwise.
Insert new bulb.
4.
Close the door and turn the
5.
handle ¼ turn to the right or
left.
LOWER LIgHT BULB RE-
QUIREMENTS
Quantity of 2 clear chandelier or
candelabra bulbs with an E-12
(small) socket base, 60 watt rat-
ing.
LOWER BULB REPLACEMENT
Open door by turning the han-
1.
dle ¼ turn to the right or left.
Remove the screw from the
2.
logset located in the center
of the emberbed and remove
the logset from the unit.
Locate and examine the bulbs
3.
to determine which bulb(s)
required replacement.
Unscrew the bulb(s) counter
4.
clockwise.
Insert new bulb(s).
5.
Install the logset into the unit,
6.
