8
www.dimplex.com
Figure 3
Figure 2
Foam
Block
Cable
Ties
Front
Glass
Trim
Track
Fireplace Installation
Fireplace Assembly
Depending on the unit, the front
glass will come packaged sepa
-
rately or installed in the firebox.
1. Remove fireplace and glass
(if not already installed) care
-
fully from the carton, discard
the plastic bag and foam
packaging.
2.
Remove the right hand side
trim by removing four Phillips
screws at the side of the fire
-
place. (Figure 3)
3. Remove the front glass, if
necessary
4. Remove the foam block from
within the fireplace (Figure 2).
5. Using side cutters or scissors,
cut and remove the two cable
ties as shown in Figure 2 and
remove the cardboard that
protects the log set.
6. Place the Front Glass onto
the track of the fireplace (Fig
-
ure 3) and slide it along the
front until it reaches the far
left of the unit.
7. Re-attach the right hand trim
piece using the four Philips
screws from step 4.
Mantel Installation
Install the fireplace assembly into
the mantel (refer to mantel as-
sembly instructions).
!
IMPORTANT:
If not using a
Dimplex mantel, the fireplace
