Over time, dust can accumulate on the grille covers, filter (if applicable) and fan
blades, which can affect the fans performance. It is recommended to clean the fan at
least once a month.
1. Turn the unit OFF and disconnect the appliance from the power supply.
2. Remove any dust build up with a soft brush.
3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used
for any stubborn marks. Never use alcohol, gasoline or other chemicals to clean.
IMPORTANT
• When the air quality indicator light is showing red, this may mean there is dust
attached to the sensor. Loosen the screw of the sensor window, open the window
and use a cotton swab to clean.
• It is suggested to replace the HEPA filter after 6-7 months of usage. To replace,
unfasten the fixed screws of the air inlet screen, draw out the screen and then
take out the HEPA filter. Next, place the new HEPA filter into the slot and ensure
it is installed properly. Push the wind inlet mesh into the position, and fix with
the screws. Follow the above to install the HEPA filter in the other side of the
appliance also.
• When the product is not in use, place in the original box and store in a cool, dry
area.
Storage
If not using the unit for an extended period of time. After cleaning please:
• Turn the unit off, unplug and take care of the mains lead & plug.
• Cover the unit and store it upright in a location where it will not receive direct
sunlight. NB- Prolonged exposure to direct sunlight will discolour the outer casing.
Cleaning
①
②
③
④
12
