7
MODE KEY
Repeat press this button, the wind will be switched in order of “normal mode
- natural breeze mode - sleep mode - intelligent mode - normal mode - ...
". Normal mode: the wind speed is constant set by the wind level, when the
"normal mode" icon is lit, 01 - 26 levels are normal mode. Natural breeze mode:
Fan will simulate a natural breeze, the wind speed changes in accordance with
the preprogrammed wind speeds. Smart mode: based on the temperature and
wind speed when it starts, its speed changes according to the temperature.
When the temperature is below 20°C, the fan stops, when the temperature rises
to 20°C, it continues automatically at the stopped level. Silent: fan blows in silent
mode; it has a total of nine levels for adjustment.
OSCILLATION KEY
After the fan starts, repeatedly touch this button to start or stop oscillation.
PROGRAM KEY
Under power-on state, timed power-off can be set. Press the PROGRAM
button; it starts the timing power-off state. "Timing" and icon displayed on the
fan display will flash once per second, rotate the drive plate clockwise, the fan
display will show 0.5
g
1.0
g
......
g
7.5
g
8.0
g
00
g
0.5
g
...... in cycle, rotate
the drive plate counter- clockwise, it cycles as 8.0
g
7.5
g
......
g
0.5
g
0 0
g
8.0
g
.......
When a time is set, 5 seconds without any operation, the timing on the display
flashes twice and beeps to show successfully time set, if there is any button
operation in five seconds (except for on/off button), the time is successfully
set and the fan returns to current state immediately, "Timing" and icon stops
flashing, if the timing button is pressed in five seconds then timing is cancelled.
If there is time setting, then “Timing" and icon is lit, if not, it is off. When setup is
successful, the display returns to display the wind level.
Under standby mode, press the PROGRAM button to set power-on time,
"PROGRAM" and icon is lit, the operation mode please refers to timed power-
off; rotate the drive plate to adjust the time. After adjustment, the set time will be
displayed on the screen. To cancel a time setting, user only need to repeatedly
press the PROGRAM button.
Inquiry: Under working state, press forward/timing button to enter the timing
status, user can check the set time, and user can re-set the time in five seconds;
if no operation within five seconds, the time shown on the screen flashes twice
and returned to the wind level.
Summary of Contents for DCPFQ35
Page 2: ......
Page 11: ......
Page 12: ...Glen Dimplex New Zealand Ltd 38 Harris Road East Tamaki Auckland New Zealand...