11
Operation
Cleaning
Filter Replacement Reminder:
After 720 hours of use, when the purifying bladeless fan is turned on, it will beep
5 times and after 5 seconds, the LED screen will light up and display and cycle
through icons as shown on image below.
After the filter has been replaced, press the power button on the remote control
for 5 seconds to clear and reset the Filter Replacement Reminder.
Over time, dust can accumulate on the rear net which can
affect the fan’s performance. It is recommended to clean the
fan at least once a month.
1. Turn the unit off and disconnect the appliance from the power
supply.
2. Remove any dust build up with a soft brush, and gently clean
the rear net with a vacuum cleaner.
3. Wipe the surface of the unit with a soft damp cloth. You may
use a mild detergent for any stubborn marks.
IMPORTANT
The control panel and other parts must not come into contact with water or any
other liquids.
If the unit fails to operate efficiently, is broken or other problems arise, unplug
and do not operate. Ask for advice by calling your local after sales service agent
or the Customer Care Centre on 1300 556 816 (AU)/ 0800 666 2824 (NZ).
Maintenance
