Operation
Natural Mode
Sleep Mode
On/Off
ON/OFF
When in standby mode, press the On/Off button on either the control panel or
remote control to turn the unit
ON
. The On/Off & fan speed indicator lights will
illuminate, and the LED Display will show the current fan speed. To turn the unit
OFF
,
press the On/Off button again.
FAN SPEED - DIAL
When the unit is
ON
, rotate the dial clockwise to increase the
FAN SPEED
. The fan
speed setting will indicate on the LED display - a number between 1-30. 30 is the
highest speed. Rotate the dial anticlockwise to decrease the
FAN SPEED
.
FAN SPEED - REMOTE CONTROL
Alternatively, when the unit is
ON
, press the
FAN SPEED
increase or decrease
buttons to set the desired fan speed. The selected speed will still show on the LED
Display.
NATURAL MODE
Press this button (or the MODE button on the remote) to activate the
NATURAL
MODE
. The
NATURAL MODE
indicator light will illuminate on the control panel once
selected. When the unit is in this mode, it automatically cycles through the speeds in
pre-set intervals. The 30 speeds are divided into 3 groups. Speeds 1-10 are group 1,
speeds 11-20 are group 2, and speeds 21-30 are group 3. Refer to below:
•
Group 1 (Speeds 1-10):
Low Natural Breeze Mode
•
Group 2 (Speeds 11-20): Middle Natural Breeze Mode
•
Group 3 (Speeds 21-30): High Natural Breeze Mode
NOTE:
The LED display will only show speeds 10/20/30, depending on the group
selected.
To exit
NATURAL MODE
, press the button again.
SLEEP MODE
Press this button (or the MODE button on the remote) to activate the
SLEEP MODE
.
The
SLEEP MODE
indicator light will illuminate on the control panel once selected.
There are 3 x different sleep settings depending on the
FAN SPEED
. Refer to below:
• High Sleeping Mode:
30 minutes High Speed + Natural Mode > 30 minutes
Middle Speed + Natural Mode > Low Speed+ Natural Mode.
• Middle Sleeping Mode:
30 minutes Middle Speed + Natural Mode > Low Speed+
Natural Mode
• Low Sleeping Mode:
Low Natural Mode.
To exit
SLEEP MODE
, press the button again.
9
