LEFT / RIGHT OSCILLATION
• When the unit is
ON
press the
LEFT/RIGHT
button on either the control panel or
remote control to begin oscillation. The LED indicator will illuminate accordingly
and the unit will begin to move left to right within 80°.
NOTE:
When the fan is first plugged in, it will oscillate 30° to calibrate the setting.
(left at 30° with a 9 second pause, followed by turning right to 80° and pausing for
15 seconds). If for some reason the oscillation angle is less than 30° or 80° then the
fan needs to complete the above process, so it can work normally.
• Press the
LEFT/RIGHT
button again to cancel the oscillation function.
UP / DOWN OSCILLATION
When the unit is
ON
press the
UP/DOWN
button on either the control panel or
remote control to begin oscillation. The LED indicator will illuminate accordingly and
the unit will begin to move Up and Down within 80°.
NOTE:
Both
LEFT/RIGHT
&
UP/DOWN
oscillation directions can be used at the
same time. This will activate a 3D-like oscillation movement.
Operation
11
