background image

9

ON/OFF 

When in standby mode, press the On/Off button on either the control panel or 

remote control to turn the unit 

ON

. The On/Off & fan speed indicator lights will 

illuminate, and the LED Display will show the current fan speed. To turn the unit 

OFF

, press the On/Off button again. 

FAN SPEED - DIAL 

When the unit is 

ON

, rotate the dial clockwise to increase the 

FAN SPEED

. The 

fan speed setting will indicate on the LED display - a number between 1-24. 24 is 

the highest speed. Rotate the dial anticlockwise to decrease the 

FAN SPEED

FAN SPEED - REMOTE CONTROL 

Alternatively, when the unit is 

ON

, press the 

FAN SPEED

 increase or decrease 

buttons to set the desired fan speed. The selected speed will still show on the 

LED Display. 

NATURAL MODE 

Press this button (or the MODE button on the remote) to activate the 

NATURAL 

MODE

. The 

NATURAL MODE 

indicator light will illuminate on the control panel 

once selected. When the unit is in this mode, it automatically cycles through 

the speeds in pre-set intervals. The 24 speeds are divided into 3 groups. Speeds 

1-8 are group 1, speeds 9-16 are group 2, and speeds 17-24 are group 3. Refer to 

below: 

Operation

•  Group 1 (Speeds 1-8):

•  Group 2 (Speeds 9-16):

•  Group 3 (Speeds 17-24):

Low Natural Breeze Mode 

Middle Natural Breeze Mode 

High Natural Breeze Mode 

NOTE:

 The LED display will only show speeds 8/16/24, depending on the group 

selected. 

To exit 

NATURAL MODE

, press the button again. 

SLEEP MODE 

Press this button (or the MODE button on the remote) to activate the 

SLEEP 

MODE

. The 

SLEEP MODE 

indicator light will illuminate on the control panel once 

selected. There are 3 x different sleep settings depending on the 

FAN SPEED

Refer to below: 

•  

High Sleeping Mode:

 30 minutes High Speed + Natural Mode > 30 minutes 

Middle Speed + Natural Mode> Low Speed+ Natural Mode.

•  

Middle Sleeping Mode:

 30 minutes Middle Speed + Natural Mode > Low 

Speed+ Natural Mode

• 

Low Sleeping Mode:

 Low Natural Mode.

To exit 

SLEEP MODE

, press the button again. 

15429_Dimplex DCAC20F Manual.indd   9

15429_Dimplex DCAC20F Manual.indd   9

9/09/20   5:42 PM

9/09/20   5:42 PM

Summary of Contents for DCAC20F















Reviews: