10
Operation
TIMER - CONTROL PANEL
The
TIMER
can be set to automatically turn the unit
ON
or
OFF
- up to a
maximum of 12 hours.
To automatically power
ON
:
1. Press the
TIMER
button on the control panel and the
TIMER
set indicator light
will illuminate. The LED Display will flash and start at 1 hour.
2. Turn the dial until the desired time from 1 to 12 hours displays on the LED.
After 5 seconds the LED Display will show the time set for the fan to turn
ON
automatically.
3. To re-adjust the timer setting, press the
TIMER
button once and repeat the
above procedure. Alternatively, to cancel the
TIMER
, press one more time or
set to '0' hour.
To automatically power
OFF
:
1. Press the
TIMER
button on the control panel and the
TIMER
set indicator light
will illuminate. The LED Display will flash and start at 1 hour.
2. Turn the dial until the desired time from 1 to 12 hours displays on the LED.
After 5 seconds the LED Display will show the time set for the fan to turn
OFF
automatically.
3. To re-adjust the timer setting, press the
TIMER
button once and repeat the
above proced ure. Alternatively, to cancel the
TIMER
, press one more time or
set to '0' hour.
TIMER - REMOTE CONTROL:
Follow the same procedure above, however use the remote control and press the
timer increase & decrease buttons instead of using the dial on the control panel.
LEFT/RIGHT OSCILLATION
When the unit is
ON
press the
LEFT/RIGHT
button on either the control panel or
remote control to begin oscillation. The LED indicator will illuminate accordingly
and the unit will begin to move left to right within 80°.
ANIONIC PURIFICATION
In the power-on state, press this button to turn on/off the negative ion function,
and the negative ion indicator shows its working status accordingly.
15429_Dimplex DCAC20F Manual.indd 10
15429_Dimplex DCAC20F Manual.indd 10
9/09/20 5:42 PM
9/09/20 5:42 PM
