DO NOT
place the product directly below a fixed socket outlet.
DO NOT
use this product if it has been dropped
DO NOT
use this product in the immediate surroundings of a bath, a
shower or a swimming pool.
WARNING:
UV radiation is dangerous for the eyes and skin.
This appliance contains a UV-C emitter/lamp.
Unintended use of the appliance or damage to the housing may
result in the escape of dangerous UV-C radiation. UV-C radiation
may, even in little doses, cause harm to the eyes and skin.
Appliances that are obviously damaged must not be operated.
Note that the UV-C lamp is designed to last for approximately 10000
hours of use. The air purifier will continue to operate without the
UV-C function when the UV-C lamp burns out.
UV-C Lamp is non-replaceable by the user, the user must not
attempt to replace the UV-C lamp.
The UV-C emitter must only be replaced by a qualified service/
maintenance person.
DO NOT
use if there are visible signs of damage to the product.
WARNING:
Do not use this product in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
WARNING:
To reduce the risk of fire, keep textiles, curtains or any
other flammable material a minimum distance of 1m from the air
outlet.
DO NOT
pull, carry or move the appliance using the power cable.
WARNING
- To avoid fire hazard - keep the cord out of heavy traffic
areas,
DO NOT
cover cord with carpeting, throw rugs, runners, or
similar coverings,
DO NOT
route cord under furniture or appliances,
NEVER
put the cord near heat registers, radiators, stoves or
heaters.
Take care to position the cord away from traffic areas where it will
not be a tripping hazard.
The socket-outlet must be accessible at all times to enable the
mains plug to be disconnected as quickly as possible.
WARNING
- Risk of fire - Do not use this appliance connected
through an extension lead or any external switching device such as
a plug in timer or remote control plug in adapter, any weakness in
the design, connections or components in these devices can easily
result in overheating of the connection points resulting in melting,
distortion and even the risk of fire.
