background image

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND 
RETAINED FOR FUTURE REFERENCE. 

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/
OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your product for 
the first time and keep them in a safe place.

•  When using electrical appliances, basic precautions should always be followed 

to reduce the risk of fire, electrical shock and injury to persons, including the 
following: 

•  If the appliance is damaged, check with the supplier before installation and 

operation.

 

Do not use outdoors.

 

Do not use in the immediate surroundings of a bath, shower or a  

  swimming 

 

pool.

 

Do not use this heater if it has been dropped.

 

Do not use if there are visible signs of damage to the heater.

 

Use this heater on a horizontal and stable surface, or fix it to the  

 

 

wall, as applicable.

•  Do not locate the appliance immediately below a fixed socket outlet or 

connection box. 

•  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

•  Children should be supervised to ensure that they do not play with the 

appliance.

•  Do not use this appliance in series with a thermal control, a program controller, 

a timer or any other device that switches on the heat automatically, since a 
fire risk exists when the appliance is accidentally covered or dis-placed.

•  In the event of a fault, unplug the appliance. 
•  Unplug the appliance when not required for long periods.
•  This product is only intended for

 INDOOR RESIDENTIAL

 applications only.

•  DO NOT

 cover cord with carpeting, throw rugs, runners, or similar coverings.

•  DO NOT

 route cord under furniture or appliances. Take care to position the 

cord away from traffic areas and where it will not be a tripping hazard.

•  This appliance must not be used in a bathroom.
•  Although this appliance complies with safety standards, we do not recommend 

2

Summary of Contents for BLF7451-AU



















Reviews: